Settings
The following table shows the conditions of the Fibre Channel ports indicated by
the LEDs.
Fibre Channel condition
Power ON
Fibre Channel is online
Signal acquired
Loss of synchronization
Fibre Channel SFP module
A Fibre Channel SFP module is required to connect an FC pass-thru blade port
to a Fibre Channel cable. If no cable is plugged in, the SFP module slots must
be fitted with a safety plug as shown in the figure below.
02
BX600
48
–
–
Installation and initial operation
a
ON
ON
OFF
ON
March 2006
b
ON
OFF
ON
blinks
U41057-J21-Z146-1-76