Fujitsu PRIMERGY BX600 User Manual page 200

Update revision 11.2004
PRIMERGY BX620 S2
The following sections describe the components and the installation and
removal procedures of the PRIMERGY BX620 S2 server blade that differ from
those of the PRIMERGY BX620 server blade described in the previous sections.
PRIMERGY BX620 S2: Performance features
The PRIMERGY BX620 S2 server blade combines the core components of a
conventional server in a hot-swappable slide-in module with one or two Intel®
Xeon™ processors, one or two SCSI hard disk drives and up to 12 GB RAM.
The PRIMERGY BX620 S2 occupies one slot in the blade server chassis. It can
be installed in combination with other PRIMERGY BX600 server blade models.
Processors The
configuration contains one processor. The second processor can be
added later. A
XEON
Each CPU offers 1 MB second-level cache.
RAM The
each. One memory bank can accommodate two DDR SDRAM
modules with 1 GB, 2 GB or 4 GB combined memory. This allows a
maximum memory configuration of 12 GB. ECC with memory
scrubbing, a hot-spare memory bank and ChipKill
External Special connector for 2xUSB and VGA ports
connectors
LAN availability A
1-Gigabit Ethernet channels and a slot for an optional I/O module with
two extra 1-Gigabit Ethernet channels. The LAN connection can be
implemented via the switch blades or via Gigabit Ethernet pass-thru
blades on the back of the blade server system unit.
02 BX600 200
– –
PRIMERGY BX620 S2
PRIMERGY BX620 S2
®
processors with 3.0 GHz, 3.2 GHz, 3.4 GHz or 3.6 GHz.
!
It is not possible to use CPUs with different clock rates or
cache capacities in the same
PRIMERGY BX620 S2
PRIMERGY BX620 S2
March 2006
offers two processor sockets. The base
can accommodate Intel
PRIMERGY BX620 S2
has three memory banks with two slots
offers an onboard LAN controller with two
Updates
®
.
™
are standard.
U41057-J21-Z146-1-76