Settings
The Management Agent Information menu provides access to the parameters
required by the LAN connection.
Follow the steps below to make the management blade accessible via the
LAN.
Ê Select 1 to set the IP address of the management blade.
Ê Select 2 to enter the network mask of your subnet.
Ê Select 3 to enter the IP address of your gateway.
Ê Select 18 to call up the Agent NTC Duplex Mode menu.
i
The management blade LAN controller only runs at 10 Mbit/sec.
Duplex mode must be defined manually via the Agent NTC Duplex
Mode (see figure below).
02
BX600
58
–
–
Installation and initial operation
March 2006
U41057-J21-Z146-1-76