Fujitsu PRIMERGY BX600 User Manual page 201

Updates
Fibre Channel If an FC daughter card is installed, the
equipped with up to two 2-Gbit/sec Fibre Channel I/O ports. To enable
use of the Fibre Channel functionality, at least one FC pass-thru blade
must be installed in the blade server.
Graphics Onboard graphics controller ATI Radeon 7000-M, 16 MB
controller
Storage The
capacity SCSI hard disk drives with a capacity of 18, 36, 73 GB (15,000 rpm)
or 36, 73, 146 GB (10,000 rpm). This allows a maximum hard disk
capacity of a server blade of 292 (2x146) GB in a RAID-0
configuration. Generally, however, the two disks are mirrored in a
RAID-1 configuration. The
Ultra320 SCSI onboard controller with HostRAID functionality (RAID
levels 0 and 1).
Security Basic error recognition and correction in the main memory with ECC
functions (ECC memory modules only).
Password for system, setup and keyboard.
Write protection for floppy disk drive.
Notification Notification on system status, selection, hard disk activity, LAN
connection status.
BIOS AMI-BIOS, 8-Mbit boot block flash memory.
PRIMERGY BX620 S2: Product designations
Product
U41057-J21-Z146-1-76
PRIMERGY BX620 S2
Basic units: PRIMERGY BX620 S2
Features:
– Supports dual Xeon processors
– 6 memory slots (to be fitted in pairs), divided into 3 memory
banks for a maximum of 12 GB DDR SDRAM
– 2x onboard LAN 10/100/1000 Mbit/s (compatible with
Broadcom 5703)
– An onboard Ultra320 SCSI HostRAID controller (1 channel)
for internal hard disks
– Slot for installing an optional I/O module (FC daughter card
or Gigabit Ethernet daughter card), requires at least one FC
pass-thru blade or an Gigabit Ethernet pass-thru blade on
the back of the blade server.
– 2 slots for 3.5" SCSI hard disk modules (hot-plug)
– Onboard graphics controller ATI Radeon 7000-M, 16 MB
– Special connection (Y cable) with 2x USB and 1x VGA port.
March 2006
Update revision 11.2004
PRIMERGY BX620 S2
can be fitted with up to two 3.5" SCA2
PRIMERGY BX620 S2
can be
has a one-channel
02 BX600 201
– –