Upgrading The Switch Blade Firmware - Fujitsu PRIMERGY BX600 User Manual

The Switch Blade

Upgrading the Switch Blade Firmware

Before updating the firmware, you need to assign an IP address to each
i
switch blade.
Proceed as follows:
Ê Switch on the blade server system

 -------------------------------------------------------------------------------- 
 (1) Management Agent
 (2) Emergency Management Port
 (3) Console Redirection
 (4) TFTP upgrade
 (5) Logout
 (6) Reboot Management Blade
 (7) System Information Dump
Enter Selection: 3
Ê On the Management Blade console select Console Redirection.

Console Redirection Table
 -------------------------------------------------------------------------------- 
 (1) Console Redirect Server Blade
 (2) Console Redirect Switch Blade
 (3) Set Return Hotkey , Ctrl+(a character) : 0
 Enter selection or type (0) to quit: 2
Ê In the Console Redirection Table choose Console Redirect Switch Blade

Console Redirection Switch Blade
 -------------------------------------------------------------------------------- 
 (1) Console Redirect Switch Blade_1
 (2) Console Redirect Switch Blade_2
 Enter selection or type (0) to quit: 1
Ê Specify the desired switch blade.
02 BX600 108
– –
Removal and Installation Routines
Console Menu
March 2006
page_root
page_0.
page_3_2.
U41057-J21-Z146-1-76

















