NEC univerge sv8100 Installation Manual page 162

Issue 4.0
Item
4 - 16
Item
No.
Redial (Speed Dial) Control
Use this option to control the
function of the extension Redial
04
key when used with Speed
Dialing. The Redial key can
access either the Common or
Group Speed Dialing numbers.
Transfer Key Operation Mode
Use this option to set the
operating mode of the extension
CONF key. The keys can be for
05
Call Transfer, Serial Calling or
Flash. When selecting the Flash
option (selection 2), refer also to
Program 81-01-14.
Hold Key Operating Mode
Use this option to set the function
06
of the Multiline Hold key. The
Hold key can activate normal
Hold or Exclusive Hold.
Automatic Hold for CO Lines
When talking on a CO call and
07
another CO line key is pressed,
the original trunk is placed on
Hold (0) or Disconnected (1).
Automatic Handsfree
Use this option to set whether
08
pressing a key accesses a
One-Touch Key or if it preselects
the key.
Ringing Line Preference for
Trunk Calls
10 Use this option to select between
Idle and Ringing Line Preference
for trunk calls.
Input Data
0 = Common and
Individual Speed
Dialing
1 = Group Speed Dialing
0 = Transfer
1 = Call back
2 = Hook
0 = Normal (Common)
1 = Exclusive Hold
0 = Hold
1 = Disconnect (Cut)
0 = Pre-select
1 = One-Touch
(Automatic
Handsfree)
0 = Idle (Off)
1 = Ringing (On)
UNIVERGE SV8100
Related
Default
Program
0
0
0
1
1
1