NEC univerge sv8100 Installation Manual page 215

UNIVERGE SV8100
Description
Use Program 30-03 : DSS Console Key Assignments to customize the key
assignments for 60-button DSS Consoles. A DSS Console key can have any function
up to four digits long (e.g., extension number or Service Code).
To prevent lamp problems when reassigning DSS Console keys, clearing an
extension programmed key before reassigning it is recommended [Enter key to be
cleared + 00 or
assignments and upload the change to the system before proceeding.)] Without
clearing an extension key first, the DSS Console may not show the correct lamp
display, although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is
connected, either by phone or using the WebPro or PC Program, you may need to
unplug the DSS and plug it back in to reset the console's lamping.
Input Data
Index 1
Index 2
Item
No.
01
ACD Installation Manual
30-03 : DSS Console Key Assignment
00 (If using WebPro or PC Programming, delete the key

DSS Console Number
Key Number
0~99 (General Functional Level)
97 = Door Box Access key
(additional data: 1~8 Door Box
001~114
No.)
 00 ~
Functional Level)
Function Number
 99 (Appearance
Issue 4.0
01~32
Additional Data
Refer to Function Number
List on the following pages.
4 - 69