NEC univerge sv8100 Installation Manual page 74

Issue 4.0
Programming



Related Features
Direct Station Selection (DSS) Console
Do Not Disturb
Handsfree Answerback/Forced Intercom Ringing
Off-Hook Signaling
Programmable Function Keys
3 - 42

Hotline always follows the Handsfree Answerback/Forced Intercom
Ringing mode set at the called extension. The Hotline caller can
override the setting, if desired.

If the partner's extension is busy, Hotline does not automatically activate
Off Hook Signaling.
Default Setting

No Hotline keys programmed (no keys assigned code 01 in Program
15-07-01).
15-07-01 Programmable Function Keys
Assign a function key for Hotline (code 01 + partner's extension number).
20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook
Signaling (Automatic Override)
Program 20-13-06 sets the conditions under which a Hotline key for a
non-ACD Agent indicates that the covered extension is busy. This also
applies to Reverse Voice Over and DSS Console keys for all co-workers.
With condition 1 in the following chart, the BLF LED is on only when both
extension line appearances are busy. In conditions 2~4, the BLF LED is on
when one line appearance is busy.
30-05-02
through
30-05-21 DSS Console Lamp Table
Customize the flash rates for the system DSS console.
UNIVERGE SV8100