NEC univerge sv8100 Installation Manual page 164

Issue 4.0
Item
4 - 18
Item
No.
CTA Data Communication
Mode
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
19
connection (1=on, 2~8=off) or
select 1 if the DIP switches are
set to printer connection (1~2=on,
3~8=off).
Baud Rate for CTA Port
Select the baud rate to be used
20
by the CTA Adapter.
Virtual Extension Access Mode
(when idle Virtual Extension
key pressed)
Determine whether a Virtual
Extension/Call Arrival Key(CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the
key functions as a DSS key to the
21
extension and for incoming calls
to that extension. When
Outgoing (1) is selected, the key
functions as a virtual extension
and can be used for incoming
and outgoing calls. When Ignore
(2) is selected, the key functions
as a CAR key and can receive
incoming calls only.
Multiple Incoming From
Intercom and Trunk
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights
solid when a trunk call rings in. If
22
22-01-01 is set to 0 for intercom
priority, the Hotline key does not
light for incoming trunk calls, but
lights solid for intercom calls.
If 15-02-22 is disabled, Hotline
keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
Input Data
0 = CTI Mode
1 = Non Procedural Mode
(Non-SCS)
0 = 4800
1 = 9600
2 = 19200
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Disable
1 = Enable
UNIVERGE SV8100
Related
Default
Program
0 15-02-20
2 15-02-19
2
1 22-01-01