ABB ACS355 User Manual page 212

212 Actual signals and parameters
All parameters
No. Name/Value
DI5
ENABLED
1905 COUNTER
LIMIT
0...65535
1906 COUNTER
INPUT
PLS IN(DI 5)
ENC W/O DIR
ENC WITH DIR Encoder pulse edges. The direction of rotation is taken into
FILTERED DI5 Filtered digital input DI5 pulses. When a pulse is detected,
1907 COUNTER
RESET
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
NOT SEL
DI1
DI2
DI3
DI4
DI5
AT LIMIT
STRT/STP
CMD
S/S CMD(INV) Counter reset at start/stop command (inverted), ie counter is
Description
See selection DI1.
Counter enabled
Defines the counter limit.
Limit value
Selects the input signal source for the counter.
Digital input DI5 pulses. When a pulse is detected, the
counter value increases by 1.
Encoder pulse edges. When a rising or a falling edge is
detected, the counter value increases by 1.
account. When a rising or a falling edge is detected and the
direction of rotation is forward, the counter value increases
by 1. When the direction of rotation is reverse, the counter
value decreases by 1.
the counter value increases by 1.
Note: Due to filtering, the maximum input signal frequency
is 50 Hz.
Selects the source for the counter reset signal.
Counter reset through inverted digital input DI1. 0 = active, 1
= inactive.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
No reset signal
Counter reset through digital input DI1. 1 = active, 0 =
inactive.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Reset at the limit defined by parameter
LIMIT
Counter reset at start/stop command. Source for the
start/stop is selected by parameter
COMMAND.
reset when start/stop command is deactivated. Start signal
source is selected by parameter
1905 COUNTER
1911 CNTR S/S
1902 TIMER START.
Def/FbEq
5
6
1000
1 = 1
PLS IN(DI
5)
1
2
3
4
NOT SEL
-1
-2
-3
-4
-5
0
1
2
3
4
5
6
7
8