Mechanical Installation; What This Chapter Contains; Checking The Installation Site; Requirements For The Installation Site - ABB ACS355 User Manual
Hide thumbs
Also See for ACS355:
- Installation manual ,
- User manual (437 pages) ,
- Quick start up manual (139 pages)
Table of Contents
Advertisement
Mechanical installation 31
Mechanical installation
What this chapter contains
The chapter tells how to check the installation site, unpack, check the delivery and
install the drive mechanically.
Checking the installation site
The drive may be installed on the wall or in a cabinet. Check the enclosure
requirements for the need to use the NEMA 1 option in wall installations (see chapter
Technical data
on page 357).
The drive can be installed in three different ways, depending on the frame size:
a) back mounting (all frame sizes)
b) side mounting (frame sizes R0...R2)
c) DIN rail mounting (all frame sizes).
The drive must be installed in an upright position.
Check the installation site according to the requirements below. Refer to chapter
Dimension drawings
on page
379
for frame details.
Requirements for the installation site
Operation conditions
See chapter
Technical data
on page
357
for the allowed operation conditions of the
drive.
Wall
The wall should be as close to vertical and even as possible, of non-flammable
material and strong enough to carry the weight of the drive.
- Quick Links:
- Alarm and Fault Indications
Hide quick links:
Advertisement
Table of Contents
