ABB ACS355 User Manual page 55

1)
AI1 is used as a speed reference if vector
mode is selected.
2)
See parameter group
SPEEDS:
DI3 DI4 Operation (parameter)
0 0 Set speed through AI1
1 0 Speed 1 (1202)
0 1 Speed 2 (1203)
1 1 Speed 3 (1204)
12 CONSTANT
Electrical installation 55
3)
0 = ramp times according to parameters
2202 and 2203.
1 = ramp times according to parameters
2205 and 2206.
4)
360 degree grounding under a clamp.
Tightening torque = 0.4 N·m / 3.5 lbf·in.