Output Mode - ABB ACS355 User Manual

80 Control panels

Output mode

In the Output mode, you can:
• monitor actual values of up to three group
signal at a time
• start, stop, change the direction and switch between local and remote control.
You get to the Output mode by pressing
the bottom.
The display shows the value of one group
OPERATING DATA
right. Page 83 tells how to select up to three signals to
be monitored in the Output mode. The table below
shows how to view them one at a time.
How to browse the monitored signals
Step Action
1. If more than one signals have been selected to be
monitored (see page 83), you can browse them in
the Output mode.
To browse the signals forward, press key
repeatedly. To browse them backward, press key
repeatedly.
signal. The unit is shown on the
01 OPERATING DATA
until the display shows text OUTPUT at
01
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
REM
OUTPUT
signals, one
491
.
Hz
FWD
Display
491
.
Hz
FWD
05
A
.
FWD
107
.
%
FWD