Constant Speeds - ABB ACS355 User Manual

192 Actual signals and parameters
All parameters
No. Name/Value
KEYPAD(RNC) See parameter
KEYPAD(NC)
DI4U,5D
DI4U,5D(NC)
FREQ INPUT
SEQ PROG
AI1+SEQ
PROG
AI2+SEQ
PROG
1107 REF2 MIN
0.0...100.0%
1108 REF2 MAX
0.0...100.0%
12 CONSTANT
SPEEDS
1201 CONST
SPEED SEL
NOT SEL
DI1
DI2
DI3
DI4
DI5
Description
1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
Defines the minimum value for external reference REF2.
Corresponds to the minimum setting of the used source
signal.
Value in percent of the maximum frequency / maximum
speed / nominal torque. See the example for parameter
1104 REF1 MIN for correspondence to the source signal
limits.
Defines the maximum value for external reference REF2.
Corresponds to the maximum setting of the used source
signal.
Value in percent of the maximum frequency / maximum
speed / nominal torque. See the example for parameter
1104 REF1 MIN for correspondence to the source signal
limits.
Constant speed selection and values. See section
speeds on page 140.
Activates the constant speeds or selects the activation
signal.
No constant speed in use
Speed defined by parameter
activated through digital input DI1. 1 = active, 0 = inactive.
Speed defined by parameter
activated through digital input DI2. 1 = active, 0 = inactive.
Speed defined by parameter
activated through digital input DI3. 1 = active, 0 = inactive.
Speed defined by parameter
activated through digital input DI4. 1 = active, 0 = inactive.
Speed defined by parameter
activated through digital input DI5. 1 = active, 0 = inactive.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
1202 CONST SPEED 1
1202 CONST SPEED 1
1202 CONST SPEED 1
1202 CONST SPEED 1
1202 CONST SPEED 1
Def/FbEq
20
21
30
31
32
33
34
35
0.0%
1 = 0.1%
100.0%
1 = 0.1%
Constant
DI3,4
0
is 1
is 2
is 3
is 4
is 5