Reference Select - ABB ACS355 User Manual

All parameters
No. Name/Value
SEQ PROG
1002 EXT2
COMMANDS
1003 DIRECTION
FORWARD
REVERSE
REQUEST
1010 JOGGING SEL Defines the signal that activates the jogging function. See
DI1
DI2
DI3
DI4
DI5
COMM
NOT SEL
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
11 REFERENCE
SELECT
1101 KEYPAD REF
SEL
REF1(Hz/rpm)
REF2(%)
1102 EXT1/EXT2
SEL
Description
Start, stop and direction commands through Sequence
programming. See parameter group
PROG.
Defines the connections and the source for the start, stop
and direction commands for external control location 2
(EXT2).
See parameter 1001 EXT1
Enables the control of rotation direction of the motor, or fixes
the direction.
Fixed to forward
Fixed to reverse
Control of rotation direction allowed
section Control of a mechanical brake
Digital input DI1. 0 = jogging inactive, 1 = jogging active.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Fieldbus interface as the source for jogging 1 or 2
activation, ie control word
and 21. The control word is sent by the fieldbus controller
through the fieldbus adapter or embedded fieldbus
(Modbus) to the drive. For the control word bits, see section
DCU communication profile
Not selected
Inverted digital input DI1. 1 = jogging inactive, 0 = jogging
active.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Panel reference type, external control location selection and
external reference sources and limits
Selects the type of the reference in local control mode.
Frequency reference in rpm. Frequency reference (Hz) if
parameter 9904 MOTOR CTRL MODE
FREQ.
%-reference
Defines the source from which the drive reads the signal
that selects between the two external control locations,
EXT1 or EXT2.
Actual signals and parameters 187
84 SEQUENCE
COMMANDS.
on page 157.
0302 FB CMD WORD 2
on page 320.
setting is
Def/FbEq
26
NOT SEL
REQUES
T
1
2
3
NOT SEL
1
2
3
4
5
6
bits 20
0
-1
-2
-3
-4
-5
REF1(Hz/
rpm)
1
SCALAR:
2
EXT1