Timer & Counter - ABB ACS355 User Manual

210 Actual signals and parameters
All parameters
No. Name/Value
1809 FO CONTENT
MIN
x...x
1810 FO CONTENT
MAX
x...x
1811 MINIMUM FO
10...16000 Hz
1812 MAXIMUM FO Defines the maximum value for frequency output FO.
10...16000 Hz
1813 FILTER FO
0.0...10.0 s
19 TIMER &
COUNTER
1901 TIMER DELAY Defines the time delay for the timer.
0.01...120.00 s Delay time
1902 TIMER START Selects the source for the timer start signal.
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
NOT SEL
Description
Defines the minimum frequency output FO signal value.
Signal is selected with parameter
FO minimum and maximum correspond to
FO and 1812 MAXIMUM FO
FO
1812
1811
1809 1810
Setting range depends on parameter
SEL setting.
Defines the maximum frequency output FO signal value.
Signal is selected with parameter
See parameter 1809 FO CONTENT
Setting range depends on parameter
SEL setting.
Defines the minimum value for frequency output FO.
Minimum frequency. See parameter
MIN.
Maximum frequency. See parameter
MIN.
Defines the filter time constant for frequency output FO, ie
the time within which 63% of a step change is reached.
Filter time constant
Timer and counter for start and stop control
Timer start through inverted digital input DI1. Timer start on
the falling edge of digital input DI1.
Note: Timer start is not possible when reset is active
(parameter 1903 TIMER
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
No start signal
1808 FO CONTENT
1811 MINIMUM
settings as follows:
FO
1812
1811
1809
FO
content
1808 FO CONTENT
1808 FO CONTENT
MIN.
1808 FO CONTENT
1809 FO CONTENT
1809 FO CONTENT
RESET).
Def/FbEq
-
SEL.
1810 FO
content
-
-
SEL.
-
10 Hz
1 = 1 Hz
1000 Hz
1 = 1 Hz
0.1 s
1 = 0.1 s
10.00 s
1 = 0.01 s
NOT SEL
-1
-2
-3
-4
-5
0