ABB ACS355 User Manual page 288

288 Actual signals and parameters
All parameters
No. Name/Value
DRIVE STOP
START FRW
START REV
8422 ST1 RAMP
-0.2/-0.1/
0.0...1800.0 s
8423 ST1 OUT
CONTROL
R=0,D=1,AO=0 Relay output is de-energized (opened), transistor output is
R=1,D=0,AO=0 Relay output is energized (closed), transistor output is de-
R=0,D=0,AO=0 Relay and transistor outputs are de-energized (opened) and
RO=0,DO=0
RO=1,DO=1
DO=1
RO=1
Description
Drive coast or ramps to stop depending on parameter
STOP FUNCTION setting.
Direction or rotation is fixed to forward. If the drive is not
already running, it is started according to parameter
START FUNCTION settings.
Direction or rotation is fixed to reverse. If the drive is not
already running, it is started according to parameter
START FUNCTION settings.
Selects the acceleration/deceleration ramp time for
Sequence programming state 1, ie defines the rate of the
reference change.
Time
When value is set to -0.2, ramp pair 2 is used. Ramp pair 2
is defined by parameters 2205...2207.
When value is set to -0.1, ramp pair 1 is used. Ramp pair 1
is defined by parameters 2202...2204.
With ramp pair 1/2, parameter
must be set to SEQ PROG. See also parameters
2202...2207.
Selects the relay, transistor and analog output control for
Sequence programming state 1.
The relay/transistor output control must be activated by
setting parameter 1401 RELAY OUTPUT 1
SIGNAL to SEQ PROG. Analog output control must be
activated by parameter group
Analog output control values can be monitored with signal
0170 SEQ PROG AO
energized and analog output is cleared.
energized and analog output is cleared.
analog output value is set to zero.
Relay and transistor outputs are de-energized (opened) and
analog output control is frozen to the previously set value.
Relay and transistor outputs are energized (closed) and
analog output control is frozen to the previously set value.
Transistor output is energized (closed) and relay output is
de-energized. Analog output control is frozen to the
previously set value.
Transistor output is de-energized (opened) and relay output
is energized. Analog output control is frozen to the
previously set value.
2201 ACC/DEC 1/2 SEL
15 ANALOG
VAL.
Def/FbEq
2102 0
1
2101
2
2101
0.0 s
1 = 0.1 s
AO=0
/ 1805 DO
OUTPUTS.
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1