Optional) Installing Electric Heater Components And Cables - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Locatio Display Name
n
Hot aisle 4 temp/
humid
Hot aisle 5 temp/
humid
Hot aisle 6 temp/
humid
● The default T/H sensor address is 1.
● Keep the last RS485_R DIP switch at OFF.
● After the addresses are set, power on the device, choose Settings > System
Settings > T/H sensor on the home screen of the display module, and set the
sensors in the aisles corresponding to the addresses to Enable. Otherwise, the
sensors will not work.
----End
4.7 (Optional) Installing Electric Heater Components
and Cables
Electric heater components include the electric heating belt, temperature sensor
probe, and electric heater controller.
Procedure
Step 1 Remove the exhaust side panel.
Step 2 Install the electric heater controller.
Issue 02 (2021-04-15)
Addre
ss
24
25
26
NO TICE
Copyright © Huawei Technologies Co., Ltd.
DIP Switch No.
1 2 3
OFF OFF OFF
ON OFF OFF
OFF ON OFF
4 System Installation (FDC Scenario)
4 5
ON ON
ON ON
ON ON
6
OFF
OFF
OFF
93