Huawei FusionCol8000-E240 User Manual page 206

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Remove the outdoor intake air filter.
Step 3 Remove the indoor return air T/H sensor. Cut off the cable tie that secures the
cable, remove the screws from the sheet metal fastener of the T/H sensor, push
the baffle plate, and remove the T/H sensor and the sheet metal fastener.
Figure 8-13 Removing the T/H sensor sheet metal
Figure 8-14 Removing a T/H sensor
Step 4 Remove the outdoor intake air T/H sensor. Remove the screws from the sheet
metal fastener of the T/H sensor.
Issue 02 (2021-04-15)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
197