Pipe Support - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Item
Water tank
drainpipe
Condensate
water pan
drainpipe
Floor drain
pipe

4.2.3 Pipe Support

Supports for pipes and water pipes as shown in the figure. The actual appearance
of the supports will be different based on onsite situations.
Figure 4-3 Pipe supports (unit: mm)
Issue 02 (2021-04-15)
Connector
G 1-1/2 inch
external
thread
connector
G 1 inch
external
thread
connector
-
NO TE
● The height of the U-shaped pipe clamp is 5 mm less than the pipe diameter (including
the thermal insulation foam).
● Install a support every 2500 mm for the straight sections of pipes, and 1000 mm away
from each bending point in turning sections.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation (FDC Scenario)
Dimensions Material
DN50 Rigid pipe (made of
PP-R, C-PVC, or
other materials)
DN32 Rigid pipe (made of
PP-R, C-PVC, or
other materials)
G50 Rubber hose
Descriptio
n
69