Huawei FusionCol8000-E240 User Manual page 69

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Locatio Display Name
n
Outdoor intake air
3 temp/humid
Cold Cold aisle 1 temp/
aisle humid
Cold aisle 2 temp/
humid
Cold aisle 3 temp/
humid
Cold aisle 4 temp/
humid
Cold aisle 5 temp/
humid
Cold aisle 6 temp/
humid
Hot Hot aisle 1 temp/
aisle humid
Hot aisle 2 temp/
humid
Hot aisle 3 temp/
humid
Hot aisle 4 temp/
humid
Hot aisle 5 temp/
humid
Hot aisle 6 temp/
humid
● The default T/H sensor address is 1.
● Keep the last RS485_R DIP switch at OFF.
● After the addresses are set, power on the device, choose Settings > System
Settings > T/H sensor on the home screen of the display module, and set the
sensors in the aisles corresponding to the addresses to Enable. Otherwise, the
sensors will not work.
----End
Issue 02 (2021-04-15)
Addre
ss
32
11
12
13
14
15
16
21
22
23
24
25
26
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 System Installation (Building Scenario)
DIP Switch No.
1 2 3
OFF OFF OFF
ON ON OFF
OFF OFF ON
ON OFF ON
OFF ON ON
ON ON ON
OFF OFF OFF
ON OFF ON
OFF ON ON
ON ON ON
OFF OFF OFF
ON OFF OFF
OFF ON OFF
4 5 6
OFF OFF ON
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
ON OFF OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
OFF ON OFF
ON ON OFF
ON ON OFF
ON ON OFF
60