Replacing A Water Pump - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Step 5 Install the new liquid level sensor and tighten it to a torque of 5 N·m. Connect the
interconnection terminal of the liquid level sensor and install the fastener.
Step 6 Power on the device and tap Start on the home screen. Ensure that the device is
running properly without generating alarms.
Step 7 Install the adjustable side panel and water baffle plate for the fan.
----End

8.5.20 Replacing a Water Pump

Prerequisites
●
●
●
Before replacing the water pump, drain water from the water tank completely.
Procedure
Step 1 On the home screen of the display module, tap Shutdown and turn off the device
switch in the PDF.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Issue 02 (2021-04-15)
Figure 8-41 Removing a liquid level sensor
(1) Fastener
A water pump needs to be replaced.
A spare water pump of the same model is available and functional.
Tools: flat-head screwdriver, Phillips screwdriver, socket wrench
NO TICE
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
(2) Liquid level sensor
226