Huawei FusionCol8000-E240 User Manual page 111

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Issue 02 (2021-04-15)
Parameter
Require
password to
start or
shutdown
onsite
Power limit
function
System
power limit
Balance of
water and
electricity
consumption
Wet mode
startup
temperature
Dehumidifyin
g function
DO_1 action
DO_2 action
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
Setting Guide
Yes or No can be set as required.
NOTE
You are advised to retain the default
value.
This parameter can be set to Enable
or Disable.
NOTE
You are advised to retain the default
value.
This parameter is displayed when
Power limit function is set to
Enable.
This parameter is used to set the
power limit of the system.
This parameter can be set to Power
saving mode, Normal water-saving
mode, Extreme water-saving mode,
or Customized mode. Set this
parameter based on the site
requirements.
NOTE
You are advised to retain the default
value.
This parameter is displayed when
Balance of water and electricity
consumption is set to Customized
mode.
Set the parameter based on site
requirements.
You can enable or disable the
dehumidifying function.
NOTE
If this parameter is set to Enable, the
device starts dehumidification when the
ambient humidity is higher than the
preset humidity threshold for a certain
range. If this parameter is set to Disable,
the device does not start
dehumidification.
Set this parameter to On or Off
based on the actual scenario.
Set this parameter to On or Off
based on the actual scenario.
102