Typical Connection With The Host - Mitsubishi Electric M32R Series User Manual

Mitsubishi 32-bit risc single-chip microcomputers

Table of Contents

14.4 Typical Connection with the Host

The host uses a serial synchronous interface to transfer data. The clock for synchronous is

generated by the host. An example for connecting the RTD and host is shown below.

Note : In this example, the RTDACK level is checked between transfer frames.

Figure 14.4.1 Connecting the RTD and Host

REAL-TIME DEBUGGER (RTD)

14.4 Typical Connection with the Host

microprocessor