Using Ethernet Site Link Retrofit Kit For Mts 4 Prime And Expansion Cabinet; Table 5-12: Ethernet Site Link Cabling For Mts 4 Expansion Cabinet With Single Site Controller - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Site Link Retrofit Kit for MTS 4 Prime and Expansion Cabinet
Using Ethernet Site Link Retrofit Kit for MTS 4 Prime and Expansion Cabinet
For an MTS Expansion Cabinet configuration with single Site Controller, follow
Ethernet Site Link functionality from the E1 and AUX connectors on the previous type of MTS 4 Junction Panel.
For an MTS Expansion Cabinet configuration with single or dual Site Controllers, follow
Procedure 4-14
connectors on the newer type of MTS 4 Junction Panel.
Procedure 4-13 How to Connect Ethernet Site Link Retrofit Kit for MTS 4
with Expansion Cabinet (old JP)
1
2
3
4
Procedure 4-14 How to Connect Ethernet Site Link Retrofit Kit for MTS 4
with Expansion Cabinet (new JP)
1
2
3
6802800U74-N September 2009
in order to gain Ethernet Site Link functionality from the Link1 and Link2
On the MTS Prime Cabinet, remove existing E1 cable from E1 connector on Junction Panel.
Connect the open E1 connector on the Junction Panel with the RJ45 coupler (3066562B01).
Bend AUX breakout and insert the second RJ45 coupler (3066562B01).
Follow Table 5-12, "Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Single Site
Controller," on page 5-23
Cabinet with Single Site Controller" on page 5-24
Bend open and connect the open Link1 connector on the Junction Panel with the RJ45 coupler
(3066562B01).
Bend open and connect the open Link2 connector on the Junction Panel with the RJ45 coupler
(3066562B01).
• For configurations with single Site Controller, follow
Cabling for MTS 4 Expansion Cabinet with Single Site Controller," on page 5-23
Figure 5-12,"Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Single Site
Controller" on page 5-24
• For configurations with dual Site Controller, follow
Cabling for MTS 4 Expansion Cabinet with Dual Site Controller," on page 5-24
Figure 5-13,"Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Dual Site
Controller" on page 5-26
and Figure 5-12,"Ethernet Site Link Cabling for MTS 4 Expansion
for further cabling and connections.
for further cabling and connections.
for further cabling and connections.
Using Ethernet
Procedure 4-13
Table 5-12, "Ethernet Site Link
Table 5-13, "Ethernet Site Link
in order to gain
and
and
4-59