Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 389

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 13-7 Generic Base Radio Alarms (Continued)
Alarm ID
ALM_BRC_ABACUS_CLK1_ALM
ALM_BRC_ABACUS_CLK1_FAIL
ALM_BRC_ABACUS_CLK2_ALM
ALM_BRC_ABACUS_CLK2_FAIL
ALM_BRC_ABACUS_CLK3_ALM
ALM_BRC_ABACUS_CLK3_FAIL
ALM_BRC_ABACUS_FS1_ALM
ALM_BRC_ABACUS_FS1_FAIL
ALM_BRC_ABACUS_FS2_ALM
ALM_BRC_ABACUS_FS2_FAIL
6802800U74-N September 2009
Recovery
Description
Action
Abacus clock 1 BRC is de-keyed
is not present by the software.
- the alarm is
reported as a
fault indication
message from
DSP.
The same as ALM_BRC_ABACUS_CLK1_ALM
Abacus clock 2 BRC is de-keyed
is not present by the software.
- the alarm is
reported as a
fault indication
message from
DSP.
The same as ALM_BRC_ABACUS_CLK2_ALM
Abacus clock 3 BRC is de-keyed
is not present by the software.
- the alarm is
reported as a
fault indication
message from
DSP.
The same as ALM_BRC_ABACUS_CLK3_ALM
Abacus frame BRC is de-keyed
sync 1 is by the software.
not present -
the alarm is
reported as a
fault indication
message from
DSP.
The same as ALM_BRC_ABACUS_FS1_ALM
Abacus frame BRC is de-keyed
sync 2 is by the software.
not present -
the alarm is
reported as a
fault indication
message from
DSP.
The same as ALM_BRC_ABACUS_FS2_ALM
Base Radio Alarms
Clear Action
The alarm is The alarm may be
cleared just after reported because of
BRC is de-keyed. the BRC hardware
failure.
The alarm is The alarm may be
cleared just after reported because of
BRC is de-keyed. the BRC hardware
failure.
The alarm is The alarm may be
cleared just after reported because of
BRC is de-keyed. the BRC hardware
failure.
The alarm is The alarm may be
cleared just after reported because of
BRC is de-keyed. the BRC hardware
failure.
The alarm is The alarm may be
cleared just after reported because of
BRC is de-keyed. the BRC hardware
failure.
Notes
13-23