Base Radio Replacement Process; Electrostatic Discharge Precaution - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Base Radio Replacement Process

Base Radio Replacement Process
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
For a list of available Field Replaceable Units (FRUs), see
Process 10-1 Base Radio Replacement Process
Remove the Base Radio module, see
1
Reinstall the new Base Radio, see
2
Perform the procedures from the
3
Chapter 6, "Configuration and
If Encryption and/or Authentication is used, perform
4

Electrostatic Discharge Precaution

The Base Radio circuitry contains many CMOS and other electrostatic discharge sensitive devices. Take precau-
tionary measures to prevent damage of Base Radio modules by static discharge when servicing the equipment.
Observe the following additional precautions:
•
•
•
For more information, see
10-10
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Wear a wrist strap (Motorola Part No. 4280385A59 or equivalent) at all times when
servicing the Base Radio to minimize static build up.
A jack is provided at top left of module cage marked with the ground symbol.
Keep spare modules in factory packaging for transporting. When shipping
modules, always pack in original packaging.
Appendix C
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Appendix A, "Field Replaceable Units
Procedure 10-1.
Procedure 10-2.
"Base Radio Configuration and Verification"
Testing". Follow Process
Process
Chapter 10: Base Radio
■ ■ ■
■
■
section in
6-3.
8-4.
6802800U74-N September 2009
(FRUs)".