Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 392

Hide thumbs Also See for DIMETRA MTS 2:
Table of Contents

Advertisement

Base Radio Alarms
Table 13-7 Generic Base Radio Alarms (Continued)
Alarm ID
ALM_TX_LO_LOCK
ALM_TX_PLL_LOCK_
DETECT_FAIL
ALM_TX_LO_SL
ALM_TX_PLL_SL_FAIL
ALM_TX_TEMP_INTERNAL_FAIL Exciter
ALM_TX_VCO_MON_FAIL
ALM_TX_VCO_MONITOR_FAIL
ALM_TX_TRAINING_FAIL
ALM_TX_FRU_BAND_MIS-
MATCH
13-26
Recovery
Description
Action
Exciter
BRC is de-keyed
synthesizer lock
by the software.
detect failure.
Reported when ALM_TX_LO_LOCK is set and
ALM_BRC_16_8MHZ_FAIL_ALM is cleared
Exciter
BRC is de-keyed
synthesizer
by the software.
steering line
failure.
The same as ALM_TX_LO_SL
BRC is de-keyed
temperature is
by the software.
too high.
Exciter VCO
BRC is de-keyed
monitoring
by the software.
failure.
The same as ALM_TX_VCO_MON_FAIL
It was detected
BRC is de-keyed
that the
by the software.
software did
not scheduled
the DSP training
when it was
necessary.
No recovery
Band
action taken by
configuration
mismatch
the software.
between Exciter
and Power
Amplifier was
detected during
initialization.
Chapter 13: MTS Troubleshooting
Clear Action
If the alarm
The alarm may be
condition
reported because of
disappears the
the BRC hardware
alarm is cleared
failure or because
and BRC can be
TX VCO is not
re-keyed again.
properly tuned (BCD
NVM parameters
configuration).
If the alarm
The alarm may be
condition
reported because of
disappears the
the BRC hardware
alarm is cleared
failure or because
and BRC can be
TX VCO is not
re-keyed again.
properly tuned (BCD
NVM parameters
configuration).
If the alarm
condition
disappears the
alarm is cleared
and BRC can be
re-keyed again.
If the alarm
condition
disappears the
alarm is cleared
and BRC can be
re-keyed again.
The alarm is
If the alarm is
cleared just after
reported it means
BRC is de-keyed.
some software error.
The alarm will be
If the alarm is reported
cleared only after
it means that Exciter
resetting BRC.
and Power Amplifier
may be incompatible.
The initialization fails
- BRC cannot be
keyed.
6802800U74-N September 2009
Notes

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimetra mts 4

Table of Contents