Table 5-23: Rf Cabling/Connections For Expansion Cabinet With Two Tx/Rx Ant. And Up To One Additional - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

RF Cabling
Table 5-23 RF Cabling/Connections for Expansion Cabinet with Two TX/RX ant. and Up to One
Additional RX ant.
In-
Cable Part
dex
1 3066543B02
2 3066543B02
3 3066543B03
4 3066543B03
5
3066543B02
6 3066543B02
7
3066543B03
8 3066543B03
9 3066543B02
10 3066543B02
11 3066543B03
12 3066543B03
13 3066543B08
14 3066543B08
15 3066543B09
16 3066543B09
17 See
Table 5-17
18 3066543B16
19 3066543B11
20 3066543B11
21 3066543B11
5-44
From Unit
Number
Base Radio 5 / RX-S 1
Base Radio 6 / RX-S 1
Base Radio 7 / RX-S 1
Base Radio 8 / RX-S 1
Base Radio 5 / RX-S 2
Base Radio 6 / RX-S 2
Base Radio 7 / RX-S 2
Base Radio 8 / RX-S 2
Base Radio 5 / RX-S 3
Base Radio 6 / RX-S 3
Base Radio 7 / RX-S 3
Base Radio 8 / RX-S 3
Base Radio 5 / Tx
Base Radio 6 / Tx
Base Radio 7 / Tx
Base Radio 8 / Tx
ATCC 3 / TX OUT
ATCC 4 / TX OUT
ATCC (3, 4)
RX Splitter 1 / Prime
Cab
RX Splitter 2 / Prime
Cab
RX Splitter 3 / Prime
Cab
In the Prime Cabinet, the cables from ATCC 1/TX OUT to Duplexer 1/TX and from ATCC
2/TX to Duplexer 2/TX needs to be combined with a T Cable and connected to Duplexer
1/TX, allowing Expansion Cabinet channels to be connected to Duplexer 2/TX.
When MTCC is used instead of ATCC, connect the cables to corresponding inputs and outputs.
RX cables from Filters in Prime Cabinet to RX Splitters in the Expansion Cabinet
are routed through holes on the back side of the top-lid.
Chapter 5: Interconnection and Internal Cabling
To Unit
RX-S 1 / BR 5 RX path / no RX or RX on 1 ant.
RX-S 1 / BR 6 RX path / no RX or RX on 1 ant.
RX-S 1 / BR 7 RX path / no RX or RX on 1 ant.
RX-S 1 / BR 8 RX path / no RX or RX on 1 ant.
RX-S 2 / BR 5 RX path / no RX or RX on 1 ant.
RX-S 2 / BR 6 RX path / no RX or RX on 1 ant.
RX-S 2 / BR 7 RX path / no RX or RX on 1 ant.
RX-S 2 / BR 8 RX path / no RX or RX on 1 ant.
RX-S 3 / BR 5 RX path / RX on 1 ant.
RX-S 3 / BR 6 RX path / RX on 1 ant.
RX-S 3 / BR 7 RX path / RX on 1 ant.
RX-S 3 / BR 8 RX path / RX on 1 ant.
ATCC 3 / TX A TX path, Coax cable, low loss
ATCC 3 / TX B TX path, Coax cable, low loss
ATCC 4 / TX A TX path, Coax cable, low loss
ATCC 4 / TX B TX path, Coax cable, low loss
ATCC (3, 4) TX path, Interconnect Harness
Duplexer 2 / TX TX path, Duplexer TX cable routed
in Prime Cabinet through conjunction hole at side of the
cabinet
Duplexer 1/ Exp RX path/ RX on 1 or 2 ant.
Cab (in MTS 4
Prime Cabinet)
Duplexer 2 / Exp RX path/ RX on 1 or 2 ant.
Cab (in MTS 4
Prime Cabinet)
Preselector / Exp RX path/ RX on 2 ant.
Cab (in MTS 4
Prime Cabinet)
Notes
6802800U74-N September 2009