Rf Cabling - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

RF Cabling

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
RF cabling refers to the cable connections among antenna connectors, the RF Distribu-
tion System (RFDS), and the Base Radios.
RF Cabling diagrams and details for different RF configuration types are presented below:
•
•
•
•
•
•
•
•
•
•
6802800U74-N September 2009
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
RF cabling depends on filter configuration.
MTS 2 - TX/RX on 1 ant., see
MTS 2 - TX/RX on 2 ant., see
MTS 4 - TX/RX on 1 ant., see
MTS 4 - TX/RX on 2 ant., see
MTS 4 - TX on 1 ant., see
MTS 4 - TX on 2 ant., see
Expansion Cabinet – TX/RX on 1 ant., see
Expansion Cabinet – TX/RX on 2 ant., see
Expansion Cabinet – TX on 1 ant., see
Expansion Cabinet – TX on 2 ant., see
Each configuration type described by the table and figure represents a few configurations. Not
all Base Radios and not all filters and associated cables are present in each configuration.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Table 5-14 and
Table 5-15 and
Table 5-16 and
Table 5-18 and
Table 5-19 and Figure 5-18
Table 5-20 and Figure 5-19
Table 5-21
Table 5-23
Table 5-24
Table 5-25
■ ■ ■ ■
■
■
Figure 5-14
Figure 5-15
Figure 5-16
Figure 5-17
RF Cabling
5-27