Mts - Configuring E1 Links; Table 8-9 Slots Configured On The E1 - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS - Configuring E1 Links
MTS - Configuring E1 Links
Syntax for .e1config MMI command:.
.e1config [-portNo -link -crc -ts16Skip -clock -siteLink -channel
-tsPattern -DI -sat -display -?]
•
•
•
•
•
•
•
•
•
•
•
•
Table 8-9 Slots Configured on the E1
No. of BR's in Site
1
2
3
4
5
6
7
8
8-28
-portNo = assign physical E1 port to channel
-link = configure options related to physical E1 line/interface
-crc = enable/disable CRC4
-ts16Skip = use/not use E1 16-th time slot
-clock = select Clock source
-siteLink single|dual = select single E1 or dual E1 sitelink configuration
-channel = creates and configures Logical E1 circuit by assigning single or
multiple E1 timeslots to a particular physical E1 port
-tsPattern 1..31 = assign time slots to a proper channel
-DI on|off = turn of/off Drop & Insert functionality. Is always off for star configuration,
but must be enabled for ring/chain configurations
-sat on|off = set link as satellite one
-display 1|2|all = display E1 configuration
-? = display help for this command
Slots Configured on the E1
1
2
2
3
3
4
4
5
Chapter 8: Site Controller
6802800U74-N September 2009