MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Procedure 4-1 How to Install the Cabinet Using the Mounting Brackets
Check that the mounting brackets have been correctly positioned in the equipment room, see
1
Figure 3-2
Mark and then drill the floor according to the dimensions shown in
2
Remember to keep the 13 mm distance behind the mounting plate. In each bracket, a 12 mm
hole is pre-drilled. The front brackets can be placed anywhere around the leveling feet at a
radius of 60 mm or 105 mm (either hidden under the cabinet, or stuck out for easy mounting),
see the circles in
Figure 4-4 MTS 2 – Drill Hole Position for the Mounting Brackets
6802800U74-N September 2009
for MTS 2,
Figure 3-4
for MTS 4, and
Figure 4-4
and
Figure
Figure 3-6
for Expansion Cabinet site.
4-5.
Floor Mounting Instructions
Figure 4-4
and
Figure
4-5.
4-9