Fujitsu AIRSTAGE J-II Design & Technical Manual page 361

Various convenient functions
z „
Displays setting status and Limitations
• The remote controller settings can be easily checked.
Summer Time display
• This function can be set easily
from Menu screen.
Simplified installation
z „
Use of non-polar 2-wire type
• Faulty wiring can be prevented by using non-polar
2-wire.
I.U. I.U.
Y1Y2Y3
non-polar
2-wire
OK
Y1
Y2
Easy Maintenance
z „
Error History Display
• The errors that occur in the indoor unit or re-
mote controller are saved as a history.
• A maximum of 32 error incidents can be saved.
Y1Y2Y3
OK
Y1
Y2
- (05 - 57) -
Child lock
• Lock / unlock method: Push the ON/
OFF button and the screen for 4
seconds.
Name Registration
• Indoor unit names can be registered in
the remote controller screen.
This makes it easy to identify the indoor
unit you want to control in the room.
Auto Address Setting/Setting Position
Notification
• Reduces errors and install time compared with the
current specification Rotary switch.
• When setting the remote controller groups, it can also be
done automatically by the new Wired remote controller
address.
• After the auto address setting of the new wired remote
controller groups, the address can be confirmed.
04
Address →
05
Backlight
z „
• Backlight enable easy operation in a darkened
room.
• For the lighting time of Backlight, 30 or 60 seconds
can be set.
• The backlight is lit while the buttons are operated
and goes off 30 or 60 seconds after the operation
stops.
03 02 01
The appropriate indoor unit
performs the air blow and
LED lamps blink