Fujitsu AIRSTAGE J-II Design & Technical Manual page 379

FUNCTIONS
„ „
4
6
Display panel
7
10
*1 : "AUTO " is not available for a heat pump model unless it is set up as an administrative indoor
unit.
*2 : "FAN " is not available for a heat pump model.
*3 : "HEAT " is not available for a cooling only model.
*4 : during Error code history display mode.
*5 : during address display mode.
*6 : during self Diagnosis mode.
SYSTEM DIAGRAM
„ „
1 remote controller
z „
Indoor unit
A
Remote controller
A , B , C : Remote controller cable.
Refer to 6-4-4 for detail specifications.
<
A 500 m ; B+C
=
2
3
1
5
8 9
13
11
12
2 remote controllers
z „
Indoor unit
B
Master
Remote controllers
<
500 m
=
1 START/STOP button
Pressed to start and stop operation.
2 Backlight display
Lights during operation.
3 Operation lamp
Lights during operation.
4 Fan control button
Selects the fan speed (AUTO
5 Set temperature button
Selects the setting temperature.(18-30°C[COOL], 16-30°C[HEAT])
6 Operation mode button
Selects the operating mode (AUTO
7 Standby indicator
Indicates during the oil recovery and defrosting operation.
8 Power source indicator
Indicates the main power ON.
9 Central control indicator
Indicates when function is locked from Touch Panel Controller or
System Controller.
10 Fan speed indicator
11 Set temperature
Indicates Error history number. *4
Indicates Indoor unit address. *5
12 Operating mode indicator
13 (Upper) Indicates the error code *4 *6
system address. *5
(Lower) Indicates the remote controller address. *4 *5 *6
C
Slave
- (05 - 75) -
, HIGH , MED , LOW
* 1, COOL , DRY ,
FAN * 2, HEAT * 3).
/ the refrigerant
).