Fujitsu AIRSTAGE J-II Design & Technical Manual page 538

ii) 2-wire type
It can choose either automatic address setting or manual address setting.
 When setting the automatic address.
Set the remote controller address in the "0" only. (Factory setting is "0")
00 0 00 1 00 2
2 3 3 3
00 00 0 00 01 0 00 02 0 00 03 0 00 04 0 00 05 0
*2 *2
*1
R.C.line: 2 wire
2 wire type R.C. 2 wire type R.C.
*
1 : Set the remote controller address in the "0" only
Address is automatically assigned from Remote controller.
*2 : When remote controller group is not constructed (1:1 connection of indoor unit and remote controller), be sure
to set the remote controller address to "0" (factory setting).
- (07-12) -