Fujitsu AIRSTAGE J-II Design & Technical Manual page 513

DRAIN INSULATION
„ „
Please confirm water flows into Drain pan of the indoor unit, and drain is done normally
●
„
when the connection of Drain hose is completed.
Please check whether there is water leak part in the Drain piping.
●
„
Please insulate it from heat by the heat insulator of enough thickness so that there is no
●
„
dewy when the confirmation ends.
Fix the drain pipe on to the wall with saddle.
●
„
Saddle
Pipe
After put out Drain hose from the wall, please cover the space with the putty etc.
●
„
Silicone sealant
Be sure to coat the entire end surface.
●
„
If there is a gap it could cause condensation
Outside
wall cap
Sealer
putty
Wall
(Outdoors)
Heat insulation
adhesive tape
- (06 - 71) -