Fujitsu AIRSTAGE J-II Design & Technical Manual page 668

MODELS : ARXD04GALH, ARXD07GALH, ARXD09GALH,
„ „
ARXD12GALH, ARXD14GALH, ARXD18GALH,
ARXD24GALH
MODELS : ARXA24GBLH, ARXA30GBLH, ARXA36GBLH,
„ „
ARXA45GBLH
MODELS : ARXC36GBTH,ARXC72GBTH,ARXC90GBTH
„ „
Change the air flow setting depending on the external static pressure is different from Normal
static pressure.
Setting of air flow can be changed by exchanged by wireless remote controller, wired remote
controller, and simple remote controller.
How to set air flow (external static pressure)
Wireless remote controller
●
„
Air flow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-3 INDOOR UNIT (setting by wireless remote controller).
Wired remote controller
●
„
Air flow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-4. INDOOR UNIT (setting by wired remote controller).
Simple remote controller
●
„
Air flow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-5 INDOOR UNIT (setting by simple remote controller).
Wired remote controller (Touch panel)
●
„
Air flow is set by function number 26 (static pressure).
Refer to "FUNCTION SETTING" and "FUNCTION DETAILS" in 2-6. INDOOR UNIT (setting
by wired remote controller [Touch panel]).
● Setting of static pressure must be fall within the static pressure setting range described in
"Chapter 4. FAN PERFORMANCE CURVE".
● Static pressure setting out of the static pressure setting range may cause product
malfunction such as capacity degradation or water leakage.
Note
- (07-142) -