Fujitsu AIRSTAGE J-II Design & Technical Manual page 663

2-16. NETWORK CONVERTOR
SWITCH POSITION
„ „
Set network convertor rotary switch 110 and 111.
●
„
CONVERTOR ADDRESS SETTING
„ „
For Group remote controller
Example
z „
Convertor
Rotary SW110
address
(10 digit)
01
15
*Setting range 00 - 15 (Arbitrary numbers can be set)
* The sum total of the Touch panel controller, Central remote controller, Network convertor for Group remote controller
and Network convertor for L
*Address of the Touch panel controller, Central remote controller, Network convertor for Group remote controller and
Network convertor for L
REFRIGERANT CIRCUIT ADDRESS SETTING
„ „
For Single split AC
Example
z „
Refrigerant
circuit
Rotary SW110
address
(10 digit)
01
99
*Setting range 00 - 99 (Arbitrary numbers can be set)
*When connecting the Network convertor for Single split AC , set up the number so that the Refrigerant circuit ad-
dress number of outdoor unit and indoor unit does not overlap .
And the sum total of the Refrigerant circuit address of Network convertor for Single split AC and the Refrigerant
circuit address of the outdoor unit and the indoor unit is a maximum of 100.
SW110 SW111
Network convertor PCB
SW setting
Rotary SW111
(1 digit)
0 1
1 5
W ® is a maximum of 16
ON ORKS
W ® must not be same.
ON ORKS
SW setting
Rotary SW111
(1 digit)
0 1
9 9
- (07-137) -