Fujitsu AIRSTAGE J-II Design & Technical Manual page 434

11) Central Release *
The operation setting restriction function of the indoor units set from the controller can be
forcibly released. (remote controller inhibit, temperature upper/lower limit setting)
12) Model Name Writer *
An arbitrary model name can be written to the target unit.
13) Error Memory Reader *
When an error occurs at an outdoor unit, the operation data records before the error are
acquired over a network and saved to a CSV file.
NOTE: To perform "Error Memory Reading", Service Tool and the corresponding outdoor
unit must be connected directly with each other. Refer to the Operation Manual of the
Service Tool for detail.
14) Time Guard Information *
Reference data for judging the maintenance period of indoor and outdoor units (compressor,
FAN, etc. integrated time) is output to a CSV file.
*: Supported by Ver. 1.1 or later
SYSTEM DIAGRAM
„ „
Refrigerant piping
Transmission
line
* USB Adaptor: Echelon® U10 USB Network interface
PACKING LIST
„ „
Name and shape
DVD-ROM
WibuKey
(Software protection key)
RB unit
Indoor unit
Indoor unit
Quantity
1 Includes the software and manuals for
Software protection key to be connected to an USB port on the PC
1 that the Service Tool is installed. Service Tool runs only on a PC with
this WibuKey.
- (05 - 130) -
USB Adaptor
Personal
(Field supplied)
Computer
(Field supplied)
Easy to carry
out with USB
Adaptor
Application
.
Service Tool