Fujitsu AIRSTAGE J-II Design & Technical Manual page 496

TRANSMISSION LINE SEPARATION RULES
„ „
The transmission line between indoor unit, outdoor unit and controllers can be connected by
●
„
one cable.
Terminal board available on the market or the ones inside the indoor unit or outdoor should
●
„
be used for transmission line separation.
Connection of three or more lines may cause poor communication for one terminal. In this
●
„
case, please use a terminal box.
Note
● Do not loop.
Example 1 : Connecting each outdoor and indoor unit with one connection wiring.
Refrigerant Refrigerant
system 1 system 2
Signal
Amplifier
Example 2 : Separating transmission line.
Refrigerant
system 1
Refrigerant
system 2
Refrigerant
system 3
Separate using
terminal board
Refrigerant
system 3
Separate on
the terminal for
transmission line.
System
controller
- (06 - 54) -