Fujitsu AIRSTAGE J-II Design & Technical Manual page 384

FUNCTIONS
„ „
4
Display panel
6
9
*1 : during Error code history display mode.
*2 : during address display mode.
*3 : during self Diagnosis mode.
SYSTEM DIAGRAM
„ „
1 remote controllers
z „
Indoor unit
A
Remote controller
A , B , C : Remote controller cable. Refer to 6-4-4
for detail specifications.
<
A 500 m ; B+C
=
2
3
1
5
7 8
12
10
11
2 remote controllers
z „
Indoor unit
B
Master
Remote controllers
<
500 m
=
1 START/STOP button
Pressed to start and stop operation.
2 Backlight display
Lights during operation.
3 Operation lamp
Lights during operation.
4 Fan control button
Selects the fan speed (AUTO
5 Set temperature button
Selects the setting temperature. (18-30°C [COOL], 16-30°C [HEAT])
6 Standby indicator
Indicates during the oil recovery and defrosting operation.
7 Power source indicator
Indicates the main power ON.
8 Central control indicator
Indicates when function is locked from Touch Panel Controller or
System Controller.
9 Fan speed indicator
10 Set temperature
Indicates Error history number. *1
Indicates Indoor unit address. *2
11 Operating mode indicator
12 (Upper) Indicates the error code *1, *3
system address. *2
(Lower) Indicates the remote controller address. *1, *2, *3
C
Slave
- (05 - 80) -
, HIGH , MED , LOW
/ the refrigerant
).