Philips LPC2194 User Manual page 231

Philips Semiconductors
ARM-based Microcontroller
Table 166: Pulse Width Modulator Register Map
Name
PWM Match Register 5. MR5 can be enabled through MCR to reset the TC,
stop both the TC and PC, and/or generate an interrupt when it matches the TC.
PWMMR5
In addition, a match between MR5 and the TC clears PWM5 in either single-
edge mode or double-edge mode, and sets PWM6 if it is in double-edge mode.
PWM Match Register 6. MR6 can be enabled through MCR to reset the TC,
stop both the TC and PC, and/or generate an interrupt when it matches the TC.
PWMMR6
In addition, a match between MR6 and the TC clears PWM6 in either single-
edge mode or double-edge mode.
PWM Control Register. Enables PWM outputs and selects PWM channel types
PWMPCR
as either single edge or double edge controlled.
PWMLER PWM Latch Enable Register. Enables use of new PWM match values.
*Reset Value refers to the data stored in used bits only. It does not include reserved bits content.
Pulse Width Modulator (PWM)
Description
231
Preliminary User Manual
LPC2119/2129/2194/2292/2294
Reset
Access
Value*
R/W 0
R/W 0
R/W 0
R/W 0
Address
0xE0014044
0xE0014048
0xE001404C
0xE0014050
May 03, 2004