Philips Semiconductors
ARM-based Microcontroller
MAM CONFIGURATION
After reset the MAM defaults to the disabled state. Software can turn memory access acceleration on or off at any time. This
allows most of an application to be run at the highest possible performance, while certain functions can be run at a somewhat
slower but more predictable rate if more precise timing is required.
REGISTER DESCRIPTION
All registers, regardless of size, are on word address boundaries. Details of the registers appear in the description of each
function.
Table 37: Summary of System Control Registers
Name
MAM
Memory Accelerator Module Control Register. Determines the MAM
MAMCR
functional mode, that is, to what extent the MAM performance
enhancements are enabled. See Table 38.
Memory Accelerator Module Timing control. Determines the number of
MAMTIM
clocks used for Flash memory fetches (1 to 7 processor clocks).
*Reset Value refers to the data stored in used bits only. It does not include reserved bits content.
Memory Accelerator Module (MAM)
Description
93
Preliminary User Manual
LPC2119/2129/2194/2292/2294
Reset
Access
Value*
R/W
0
R/W
0x07
Address
0xE01FC000
0xE01FC004
May 03, 2004