Commit Mode - Siemens SIMATIC NET Configuration Manual

Further notes
You display the settings for the mode with the
See also
show wlan device (Page 141)
6.1.4.2

commit mode

Description
With this command, you specify when the modified WLAN settings become effective on the
SCALANCE W700 device.
Requirement
You are in the WLAN Configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call up the command with the following parameters:
commit mode { auto | manual }
The parameters have the following meaning:
Parameters
auto
manual
Result
The commit mode is specified.
Further notes
You show the settings for the commit mode with the
See also
show wlan device (Page 141)
commit wlan-settings (Page 154)
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Each change to the WLAN settings is automatically applied and is immediately effec-
tive.
The changes are accepted, but are still not active. The changes only take effect when
you confirm the changes with the "
command.
show wlan device
" command.
commit wlan-settings
show wlan device
Network structures
6.1 WLAN
command.
153