Wlan Security Dot1X Username (Client) - Siemens SIMATIC NET Configuration Manual

Security and authentication
10.2 WLAN
10.2.4.7

wlan security dot1x username (client)

Description
With this command, you specify the user name for the RADIUS server.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan-context-x)#
Syntax
Call up the command with the following parameters:
wlan security dot1x username <string>
The parameter has the following meaning:
Parameters
string
Result
The user name is specified.
Further notes
You display the settings with the
412
Description Range of values / note
User name Enter the user name for the RADIUS server. You speci-
fy the corresponding password with the
dot1x password
show wlan security
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
command.
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05
wlan security