Show Events Smtp-Port - Siemens SIMATIC NET Configuration Manual

Network protocols
7.5 SMTP client
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events sender email
Result
The configured e-mail sender address is displayed.
7.5.1.3

show events smtp-port

Description
This command shows the configured SNMP port.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events smtp-port
Result
The configured SMTP port is displayed.
354
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05