The parameters have the following meaning:
Parameter
index
meter
Result
The cable length is specified.
Further notes
You show the set cable length with the
6.1.5.14
wlan antenna gain-2-4GHz
Description
With this command, you specify the antenna gain of the antenna type "User defined" in the
2.4 GHz frequency band. With the
transmit power is exceeded with the setting.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan antenna gain-2-4GHz <index(1)> <dBi(0-30)>
The parameters have the following meaning:
Parameter
index
gain value
Result
The antenna gain is specified.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Antenna connector
Cable length in meters [m]
show wlan basic
Description
Antenna connector
Antenna gain in decibels isotropic (dBi)
Range of values / note
1
0...30
Default: 0
show wlan antennas <wlan 0/X>
command, check whether the maximum
Range of values / note
1
0 ... 30
0 = antenna is not connected
Network structures
6.1 WLAN
command.
167