Snmp Community Index - Siemens SIMATIC NET Configuration Manual

The parameters have the following meaning:
Parameter
GroupName
Version
Authentication
Result
The access to an SNMP group is deleted.
Further notes
You configure the setting with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
7.4.2.6

snmp community index

Description
With this command, you configure the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp community index <CommunityIndex> name <CommunityName>
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Name of the group to which access is
deleted
Selects the version of the protocol
used
Selects the authentication method:
command.
snmp access
Range of values / note
max. 32 characters
•
v1
•
v2c
•
v3
•
auth
•
noauth
•
priv
command.
show snmp group
show snmp group access
show snmp viewtree
Network protocols
7.4 SNMP
command.
335