Vap Broadcast Ssid (Access Point) - Siemens SIMATIC NET Configuration Manual

Industrial wireless lan to ieee 802.11n command line interface

Hide thumbs Also See for SIMATIC NET:

Table of Contents

vap broadcast ssid (access point)

With this command, you enable the "Broadcast SSID" function. The SSID is sent in the

frame of the access point and is visible for other SCALANCE W700 devices. This means that

clients on which the "Any SSID" option is enabled can also connect to the access point.

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

vap broadcast ssid

The function is enabled.

Further notes

You display the setting with the

You disable the function with the

Table of Contents

Scalance w720 Scalance w760