Wlan Security Dot1X Password (Client) - Siemens SIMATIC NET Configuration Manual

10.2.4.8

wlan security dot1x password (client)

Description
With this command, you specify the password for the RADIUS server.
When assigning the password, ASCII code 0x20 to 0x7e is used.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan-context-x)#
Syntax
Call up the command with the following parameters:
wlan security dot1x password <string>
The parameter has the following meaning:
Parameters
string
Result
The password is specified.
Further notes
You display the settings with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
New password
show wlan security
Security and authentication
Range of values / note
Enter the password for the user name. You specify
the user name with the
wlan security dot1x
command
username
command.
10.2 WLAN
413